Machine-Tools.Com complete machine and parts directory/newsgroup   >   By Location   >   Colorado   >   apla-tech pro air float drywall finishing system tool

apla-tech pro air float drywall finishing system tool


Article Sent By: pearlietrevino@machine--tools.com (Pearlie Trevino)
Pearlie Trevino is presenting: apla-tech pro air float drywall finishing system tool
1 – Apla Pump – complete in good working and cosmetic condition (does have two small manufacturing cracks in bottom of container-came that way and don't affect performance or operation).
1 – 3’ Cannon Complete (with air and mud regulator ends and piston-disassembled for photo)– excellent working condition has some cosmetic imperfections
1 – 18” Cannon Tube (18" is actual measurement w/o ends on) with piston – same condition as other cannon above
All Float and Mud Heads are in Perfect Working order and overall good cosmetic condition. All have some dried drywall mud on them in different spots, which does not affect performance.
1 – 3” Inside Corner Float Head
1 – Inside 90 degree mud head (for hand taping)
1 – Graco Texture Gun and hose - not shown in main photo: they are pictured seperately below- cost well over 350.00 with hose. Purchased seperately from Sherwin Williams.
Information from the manufacturers website: http:// /finishtools.htm
The Apla-Pump® is really four tools in one!
Fill 10-gallon reservoir with compounds and mix with water. Attach either "Cannon"™ or mechanical tools to the fill valve. Tools fill in seconds, pneumatically! No need to bend down or hand pump anymore. (use ¾ Hp compressor for filling tools).
No more pails to carry or clean! Mix in reservoir and roll to desired location.
Clean up is easy! Circulating water cleans the pump. Empty the reservoir, add fresh water and attach supplied spray hose to spray clean all your tools. Includes three additional airports, a 25' air supply hose, "Cannon"â„¢ filler, floating lid, container cover, and water hose and nozzles.
To convert to texture sprayer, attach 50' texture lines with spray gun and you're ready to texture a variety of textures! A 5-6 Hp compressor or larger is required. Additional 25' texture line can be added.
* Weighs about 54 lbs. when empty!
* Rolls easily on pneumatic wheels!
* Operates with thick or thin compounds!
* Being able to travel three times further before refilling tools saves 66% filling time
* Blade tension assembly helps achieve the desired crown
Quality of finish superior than mechanical box finish
Recommended for the first coat to fill recess. Fill "Cannon"® with thicker compound to achieve less shrinkage!
Fill coat 70 to 80 linear feet before refilling!
For fill, second or finish coat. Fill "Cannon"® with compound for a high quality finish.
When second or finish coating you travel 100 linear feet or more before refilling.
Also travels 100 feet or more before refilling.
(please look at our rules and privacy policy)
Contact pearlietrevino@machine--tools.com (Pearlie Trevino) for additional information. This email is used for forwarding to newsgroup user.




 apla-tech pro air float drywall finishing system tool  apla-tech pro air float drywall finishing system tool  apla-tech pro air float drywall finishing system tool  apla-tech pro air float drywall finishing system tool  apla-tech pro air float drywall finishing system tool  apla-tech pro air float drywall finishing system tool  apla-tech pro air float drywall finishing system tool