Machine-Tools.Com complete machine and parts directory/newsgroup   >   By Location   >   Alaska   >   Icom ic-R70 communications receiver

Icom ic-R70 communications receiver


Article Sent By: Joy.rice@machine--tools.com (Joy Rice)
Joy Rice is presenting: Icom ic-R70 communications receiver
ICOM IC-R70 Shortwave Communications Receiver
Excellent condition. Used less than 10 hours! Includes English and Japanese instruction manuals, schematic diagram, and power cord.
The IC-R70 covers LW, MW and SW in all modes.
It has an analog S-Meter and features squelch, tone,
Lock, preamp, atten., RIT, PBT and Notch. The rear panel
has antenna inputs for PL259 or Hi-Z and
for external speaker and mute.
The Icom R70 receiver system is a quadruple conversion superheterodyne covering 100 kHz to 30 MHz with 100 Hz display resolution. Modes of reception includes AM, SSB, RTTY, CW and FM [with EX257 option- not included]. Advanced features include: Pass Band Tuning, IF notch, adjustable AGC, three tuning rates, dual VFOs, Scope Jack, Line Output, RIT, dial lock, converter input jack, adjustable noise blanker and built-in preamplifier.
Frequency Range ....... 100 - 30000 kHz
Power ................. 117/235 VAC 50/60 Hz
Antenna Impedance...... 50 ohm or single wire
Selectivity (-6dB) .... AM 6.0 kHz, SSB 2.3 kHz
Sensitivity ........... 0.16 µV 1.6-30 MHz SSB/CW (S+N/N=10dB)
Spurious Rejection .... >60 dB
Freq. Stability ....... 250 Hz After 1 Hour
Intermediate Freqs. ... 1st IF = 70.4515 MHz
Dimensions............. 11 1/4 x 4 3/8 x 10 7/8 inches
Weight ................ 16.3 Lbs. (7.4 kg)
(please look at our rules and privacy policy)
Contact Joy.rice@machine--tools.com (Joy Rice) for additional information. This email is used for forwarding to newsgroup user.




Icom ic-R70 communications receiver