HEMCO DEPTH GAGE IN CASE - IN GOOD CONDITION warranted, peace of mind guaranteed with 60 days money back*. * Surplus to the needs of a local aerospace manufacturer. * Functionally good - the operation is smooth and accurate over the full range and the measuring faces are good. * Cosmetically good - both the instrument and the case - no previous owner marks. * The maximum rod travel is .125". The rod diameter is 1/8", the anvil base is ~ 5/8" X ~ 5", and the indicator diameter is 1-1/2". The readout is a .0005" per division dial indicator with an adjustable bezel. * The rod is reversable, with straight and footed ends (~ 8" long - replaceable with longer / shorter rods.). The footed end allows measurement from a face to a groove , or the width of a groove if it is > .052" (the thickness of the foot). * The anvil is removeable / replaceable with other shapes. * In the second picture, the knob on the right locks the indicator and the knob in front locks the measuring rod. * Tested with 1.340" to 1.443" standards (.103" "step") and found to operate properly and be accurate within 1 division (.0005"). * email seller directly - click s-smith@machine--tools.com here or, * call Dave Odegard at (***)-646-0090 or, * inspect at 311 Main St, Manchester, CT (but call first). * CLOSING IS WEDNESDAY MORNING JANUARY 31. IF YOU HAVE A LATE QUESTION - CALL - WE ARE NOT ALWAYS AT THE COMPUTER. (please look at our rules and privacy policy) |
s-smith@machine--tools.com (Samuel Smith)
for additional information. This email is used for forwarding to newsgroup user.