|
This is a great mount for your IC-706 control head. Just attach the MB63 mounting plate (not included) and you can detach your IC-706 control head quickly when you leave the car. The LM-700 installs in seconds and can be swiveled, rotated and adjusted to virtually any position and then locked into place with the locking lever. Secured with a flexible pad that has 3M automotive adhesive on the back for easy one-time application. The LM-700 mount can be removed without leaving any sticky residue and reinstalled in another vehicle using a replacement Flex Pad. Read the instructions for the LM-700 to ensure maximum adhesion. Simply clean the mounting location with the included Surface Prep Kit and dry with a clean towel. The Prep Kit is specially formulated to remove dirt and silicone emulsions like Armor All© from your dash. Next, clean the same area with the included alcohol pad and dry again with the towel. Remove the Flex Pad from the LM-700. Peel the tape off the adhesive, press to the mounting location and apply firm pressure. 3M recommends that the adhesive "cure" for 72 hours before using. Although this is hard to do, it's really a good idea and well worth the wait. Installation is really that easy. - There are many configurations possible. The only tool you will need is a phillips screw driver. Please see our phots for a few of the examples we used to mount our control head. If you need extra flex pads with the cleaning kit, we offer them for $4.95 ea. This is a good idea to have around, so its there when you move your mount to a new vehicle. If you have any questions, please e-mail them to r-buchanan@machine--tools.com (please look at our rules and privacy policy) |
r-buchanan@machine--tools.com (Ramona Buchanan) for additional information. This email is used for forwarding to newsgroup user.
