Composite Building Material For Clay or Dough-Like Consistency Cures To A Hard Smooth Ceramic-Like Finish Marine and Aircraft Composite Repair and Fabrication ØNon-Critical Mix Ratio Easy 1:1 Parts by Volume, Just Knead Together By Hand Ø2-Hour Working Time And Will Set Up Overnight ØMoldable Clay-like Consistency That Can Be Rolled, Shaped and Sculpted To Shape ØSandable, Drill and Tapped, Carveable, Machined, Painted ØExcellent Adhesion To Epoxy, Polyester or Vinyl Ester Fiberglass For Repairing Hulls ØExcellent Adhesion To Aluminum, Steel, Concrete/Ceramic, Wood and Composites ØLightweight Density, Less Than 0.95G/CC (Will Float On Water) For RC Hobby Use Ø14,000-PSI Compressive Strength ØExcellent Water/Salt Water Resistant for Marine/Aero Applications ØVery Low Shrinkage- Dimensionaly Stable And Will Not Swell During Cure Ø2-Hour Working Time And Will Set Up Overnight At Room Temperature ØVoid Free Results and Excellent Detail Pick-up and Duplication MAX EMC is an epoxy based molding and modeling resin system that offers a formable compound that cures to a hard and durable polymer. MAX EMC holds its profile when sculpted or formed to shape. When cured, it demonstrates lightweight in density with a high compressive strength. It is also dimensionally stable, non-porous, sandable and can be machined and painted. MAX EMC is also an excellent SMC repair compound. Measure out equal parts of Part A and Part B and mix by kneading together by hand until a uniform color is achieved. A fist-size mass will have about 90 to 120 minutes of working time. A larger mass will have a shorter working time due to heat generation (Exotherm). Color tinting can be done at this stage by kneading the pigment paste or powder to the mix. Press in into any mold and allow to cure over night at room temperature and demold. MAX EMC cures to a tough but easily sandable compound suitable for molding, modeling, patching holes and gauges on composites panels, wood or metal hulls and SMC parts. It is also can be used as an adhesive for lightweight applications such as RC hobby craft, capable of bonding metals, composites, fiberglass and SMC (Sheet Molding Compound) parts. Included with every kit is a copy of MSDS, DATA SHEET and our Comprehensive "Surface Preparation and Applications Bulletin" which contains a wealth of information high performance bonding technology. FOR TECHNICAL SUPPORT PLEASE CALL (please look at our rules and privacy policy) |
lenorewilkerson@machine--tools.com (Lenore Wilkerson)
for additional information. This email is used for forwarding to newsgroup user.