|
List Price on one of the 5 sensors is between $195.00 and $432.00. • Adult Reusable 210 Finger Clip • Adult Multi-Site Y 320 Sensor • Adult Disposable 520 Sensor • Neonatal Multi-Site Y 360 Sensor • Neonatal Disposable 560 Sensor Size: 4.0 x 11.0 x 10.0 in (102.0 x 279.0 x 254.0 mm) Patient Type: Adults, Pediatrics, Neonates Market Clearance: CE / FDA 510(k) This stand-alone bedside oximeter features exclusive ConMed Dophin ONE™ digital technology, including our patented digital sensor (the only one on the market today) which both amplifies and digitizes the signal in the sensor, delivering a stronger, higher quality signal. That means fewer alarms, and better performance during low perfusion, higher motion situations. The ConMed Dolphin ONE™ 2100 Pulse Oximeter consists of the Dolphin ONE™ OEM 601 Module technology, (1) extension cable, and (1) oximeter sensor to non-invasively calculate the functional saturation of arterial hemoglobin (SpO2) and pulse rate. It features an easy-to-read display that presents patient data and status information: an LCD (liquid crystal display) display that shows the SpO2, pulse rate values, a plethysmographic waveform, the current high and low SpO2 and pulse rate limit settings, and other messages as appropriate. The ConMed Dolphin ONE™ 2100 Pulse Oximeter is powered either with a voltage input of 100-240Vac, 50-60Hz or with a sealed lead-acid battery with an operating time of approximately 5.5 hours and a charge time of 4.5 hours to 80% capacity. The maximum AC power requirement is 33 VA. An automatic self-test at start-up. Backlit LCD display for exceptional visibility when viewing in subdued lighting conditions. Access to user-selectable high and low alarm limits for SpO2 and pulse rate. An audible pulse indicator with adjustable volume. Visual and audible (adjustable volume) alarms. A temporary alarm silence feature; silences audible alarms for 120 seconds. An "all mute" alarm silence feature; silences audible alarms continuously until deactivated. Status and alarm informational messages appear on the LCD display. 4 to 12 second SpO2 response averaging modes, depending on the signal to noise ratio. Trend data storage up to 24 hours; trend data is retained after power cycling. Automatic scaled plethysmographic waveform. Large SpO2 digital display for clear differentiation from the pulse rate value in the optional display screen. The extension cable connects between the monitor and the oximeter sensor(s). The extension cable is available in one configuration and is approximately 8 feet long (2.44 m). The ConMed Dolphin ONE™ sensor(s) can measure the light absorption of blood from light emitting diodes (LEDs). Oxygen saturated blood absorbs light differently as compared to unsaturated blood. The amount of light absorbed by the blood at different wavelengths is used to calculate the ratio of oxygenated hemoglobin to total hemoglobin in arterial blood. Where perfusion = (AC/DC)905 X 100 % Dolphin ONE 210, 320**, 360*, 520, 560* * This specification is based upon SpO2 testing on adult subjects under normal perfusion with an accuracy of ± 2.5%. Literature predicts an accuracy range of ± 1% for neonates accounts for the effect of fetal hemoglobin in neonatal blood. ** Sensor can be used with or without the 921 Ear Clip for the same device accuracy. • Adult Reusable 210 Finger Clip • Adult Multi-Site Y 320 Sensor • Adult Disposable 520 Sensor • Neonatal Multi-Site Y 360 Sensor • Neonatal Disposable 560 Sensor Product Literature – click to view or download PDF: Comparison of Motion Artifact Rejection Performance During Hypoxemia in Advanced Technology Pulse Oximeters Performance of the 2100 Pulse Oximeter During a Hypoxemic Breathe-down High Level Disinfection and Reusable Pulse Oximetry Sensors J.E. Scharf, B. Shah (9/29/01) When Pulse Oximeters Fail: Motion and Low Perfusion. • Biotek Simulation Comparison * Dolphin ONE™ software for raw photo-plethysmogram waveform data analysis Research Dolphin ONE™ software is available for purchase from ConMed to save and even analyze raw photo-plethysmogram data. Through purchase of this research software, pulse oximeter waveforms may be analyzed in many new and exciting ways. ConMed offers a trial version of the Dolphin ONE™ software that saves raw photo-plethysmogram files in desktop PC format. It is available free-of-charge and may be downloaded from this site in the near future. Both the trial version and the research version of Dolphin ONE software require Microsoft Windows 95 or later and a serial cable between the end-user's desktop PC and the 2100 Pulse Oximeter. Interesting methods of photo-plethysmogram analysis (past, present and future) are outlined in Dr. Shelley's excellent chapter linked below. Pulse Oximeter Waveform: Photoelectric Plethysmography. K. Shelley, S. Shelley, C.L. Lake, R.L. Hines, C.D. Blitt. Clinical Monitoring. W.B. Saunders Company, Philadelphia, 2001. Ch. 23:420-28. Our 2100 Pulse Oximeter is compatible with PROFOX Sleep Study software. Please feel free to contact PROFOX directly for purchasing the software. * Dolphin ONE™ technology evaluation kit ConMed offers a comprehensive evaluation kit, with our custom-designed Dolphin ONE™ software and a hardware evaluation platform based on the OEM 601 Module and/or the OEM 701 Module. This is a fully functional device that can be directly connected to the communication port of a PC, enabling the reviewer to see the pulse rate, SpO2, and the photoplethysmogram. Note: the kit is for engineering evaluation only. (please look at our rules and privacy policy) |
Monicaayala@machine--tools.com (Monica Ayala) for additional information. This email is used for forwarding to newsgroup user.
