If you have any further questions, drop me an email. Product Description from manufacturer: 61 multi-function memory channels plus 1 call channel Memory Name (MN) function with 6-digit alphanumeric display Multi-function microphone with backlit keys The TM-261A and TM-461A put out an impressive 50 watts and 35 watts, respectively. Both models also have mid- and low-power settings. Strict MIL-STD environmental standards for vibration (MIL-STD 810C) and physical shock (MIL-STD 810D) are fully complied with. 61 multi-function memory channels plus 1 call channel For quick access, essential data - transmit and receive frequencies, frequency step, tone frequency, etc. - can be stored in the 62 memory channels. All channels can store transmit and receive frequencies independently for odd split repeaters. All 62 channels can be identified alphanumerically (max. 6 characters) instead of by frequency. This is particularly convenient for repeaters and club channels. It is also possible to switch to a channel number display. Built-in DTSS (Dual-Tone Squelch System) allows DTMF access: the squelch is opened only when a specific 3-digit code has been received. Using the wildcard asterisk, group calling is also possible. Choose from several scan modes: full band scan, programmable band scan, and memory scan with programmable memory channel lock-out. There are also 2 scan stop modes: TO (time-operated) and CO (carrier-operated). Two menu modes - A and B - offer full control over such settings as frequency step and the time-out timer, when required. Up to ten 15-digit DTMF codes with ID can be stored for auto-dial and autopatch use. Redial is also provided. Built-in CTCSS tone encoder and optional decoder The optional decoder enables the setting of different tones for transmit and receive. Optional backlit DTMF microphone (supplied with some versions) This multi-function microphone has backlit keys to facilitate operation in low-light situations. Auto repeater offset (TM-261A) 140 x 40 x 160.5 mm (5.51 x 1.57 x 6.31 in.) (please look at our rules and privacy policy) |
r.brady@machine--tools.com (Rodney Brady)
for additional information. This email is used for forwarding to newsgroup user.