Machine-Tools.Com complete machine and parts directory/newsgroup   >   By Location   >   Northern Marianas Islands   >   Energy efficient lighting retrofit town & country elec

Energy efficient lighting retrofit town & country elec


Article Sent By: Hector-boone@machine--tools.com (Hector Boone)
Hector Boone is presenting: Energy efficient lighting retrofit town & country elec
Energy Efficient Lighting Retrofit
Come to your facility and retrofit/modify (20) of your existing 3-lamp/bulb light fixtures. We will remove the current ballasts in each of your fixtures and replace them with (20) energy efficient 3-lamp electronic ballasts. We will also replace the (60) lamps/bulbs in your fixtures with the more energy efficient T8 fluorescent lamps/bulbs. Your existing fixtures must have (3) T12 fluorescent, Bi-pin lamps/bulbs per fixture.
Provide all hardware and equipment needed.
Benefits of updated lighting systems:
Average energy savings from 20-50%
T-8 fluorescent bulbs are "instant on" and burn cooler than T-12 or any high bay fixture
Utilities may have incentives for efficiency upgrades (We proactively monitor all incentive programs enabling you to maximize savings on your projects.)
Click on the thumbnails below to view a larger images:
Faith Technologies, Inc. is a full service electrical and specialty systems contractor with 14 locations in five states. Faith Technologies, Inc. has three divisions: Town & Country Electric in Wisconsin and Indiana, SKC Electric in Kansas and Missouri, and Faith Technologies in Atlanta, Georgia.
With more than 1,300 employees, Faith Technologies, Inc. is one of the largest privately-held electrical contractors in the U.S.
Your Success Is Truly Our Future …
Service work must take place within a 50 mile radius of one of the following Wisconsin cities:
Appleton; Madison; Milwaukee; Green Bay; Stevens Point; Sheboygan. We occasionally do work out of these areas. We encourage you to contact us to discuss your specific needs if you are not located in one of the above areas.
Pricing is based on typical open-space building with a ceiling height of 8-12 ft.
Must have adequate floor space for the ladders to maneuver for installation.
Service work shall take place between the hours of 7:00 a.m. and 4:00 p.m. CST Monday thru Friday.
Your Success is Truly Our Future
(please look at our rules and privacy policy)
Contact Hector-boone@machine--tools.com (Hector Boone) for additional information. This email is used for forwarding to newsgroup user.




Energy efficient lighting retrofit town & country elec