|
• Length: 159†less tow pole • Width: 94†for 7’ brush; 106†for 8’ brush • Weight: 1690 pounds (7 foot) • Frame: 4†square tubular backbone and rectangular tube and plate rear frame • Engine: 2 cylinder, air-cooled, gasoline • 18 BHP @ 3600 RPM, 12V electrical system • 30° sweeping angle left/ right • Drive: low speed, high torque, 18 c.i.d. hydraulic motor • Pump: gear, directly coupled to engine • Valve: two spool with built in relief valve for rotation • Filter: full flow 10 micron spin-on • Automatic type taper bearings *The above specs can be found on M-B Companies, Inc. website. These specs are for a NEW UNIT used merely to give as much information as possible for this USED unit. Ours is older and may not match the above description exactly. If you question anything or want to confirm anything please contact us. This unit has not seen much use. The tank is a 150 gal. capacity. There is quite a bit of tread on the tires. Seems to run good. Does however need a muffler. Other than that it runs great. If you have any questions or concerns please call (***)-455-3580 or feel free to post a question. If you would like more pictures we can take them at your request and we will email or fax them to you. (please look at our rules and privacy policy) |
D_phillips@machine--tools.com (Dustin Phillips) for additional information. This email is used for forwarding to newsgroup user.
