|
150 +/-   2' x 8' x 3/4" MDO Concrete forms These forms are the Gates horizontal rod system- very light and easy to haul The forms have 7 pours on them. See the pictures of the corners- these are still square, not rounded off like old forms. The panels themselves are not the gates brand, but are MDO concrete panels routed to match and accept the gates rod ties. This system sets fast. Go to /residential.htm for details on the gates system. Ties and accessories can be ordered directly from gates. 2500+ feet of spring steel rods (Horizontal Rod System) Mostly 8' rods, some 4' and some 2'. These are from Gates, and are spring steel. They won't bend out of shape. This is a very tough forming system, and it all fits on one truck! No more hauling around a gazillion walers -I have poured 200' of 8' wall with what is on the truck 1973 Chevy C60 with 49,767 original miles- runs great That's right, under 50,000 original miles, has auto tranny, 2 speed rear- fair tires straight body- all glass good. 16' flat bed is rusty. You could drive across the continent in this truck with no problems. Title is free and clear. 600 lineal feet of 2x12 footing boards About half are full 16' boards, others are various sizes. around 50 steel stakes, some spreader bars Lindley Vibrastrike with 12' board This vibrastrike is an older unit, but runs great. The flexible drive shaft and black flex housing was replaced and has 3-4 hours use. 12' bar is a Screed King brand, magnesium, still straight. 8' and 16' magnesium 2x4 screed boards-straight 42" whiteman power trowel- Q.P., near new combo blades This machine is a 2003 model I believe, I purchased it nearly new from United rental, has been serviced and starts first pull. Has never had a collision and is very smooth. It has combination float/finish blades with 6 pours on them. Hit bar cutter bender-good condition Minnich Solo Gas backpack Concrete vibe Vibe runs good, 6' shaft from handle, 8' total length shaft. Head has never been in concrete, 1 7/8" x 13". 21 foot shaft has never been in concrete. Motor is 3hp. This is a heavy duty vibration unit. 2- 200' keeson steel core tapes Builders level and tripod, Bull float, Fresno, 4 Handles, Horsehair broom, Tamp, 2 wheelbarrows, tie wire twisters, 2 aluminum concrete rakes, Tie nippers, 2 cleanout tools. Check out all the pictures and ask questions, I will post questions on listing. This is located in Wasilla, Alaska. Here is your chance to get set up pouring walls and slabs!!! (please look at our rules and privacy policy) |
Cliffordgarrett@machine--tools.com (Clifford Garrett) for additional information. This email is used for forwarding to newsgroup user.
