|
AGILENT 34411A DIGITAL MULTIMETER. New in box. Factory warranty. The Agilent 34411A sets a new benchmark for digital multimeter performance with up to 50,000 readings per second at 4 1/2 digits, 1 million readings of volatile memory and triggering capabilities. The 34411A has all the features of the 34410A, plus additional performance that makes it even more powerful. The 34411A is a 6 1/2 digit, dual display benchtop for use in both R&D and manufacturing environments. * 50,000 readings/sec. @ 4 1/2 digits to the PC * Analog level and pre/post triggering * Capacitance & temperature measurements * Data logger for improved usability * 50,000 reading non-volatile memory * Designed to comply with LXI Class C specification The Agilent 34410A and 34411A 6-1/2 Digit DMMs represent the latest generation of multimeters from Agilent Technologies. Building on the phenomenal success of the industry-standard Agilent 34401A, these new meters offer improved accuracy, expanded measurement capability, dramatically improved measurement speed and throughput, and modern computer interfaces including LAN and USB. The dual display offers both dual measurement capabilities and ease of use when setting up and configuring the DMM. Improvements have been made in every facet of the 34401A to make the best even better, whether you use it on the bench or in a system. Whether it's raw reading speed or fast system throughput, the 34410A sets a new benchmark in performance. Using a new A/D technology, the 34410A achieves an impressive 10,000 readings a second at 5-1/2 digits, and can stream readings to your computer at this same speed! Triggering is fast and precise, with both trigger latency and trigger jitter less than 1 µs, while bus query response is less than 500 µs. ACV measurements are faster as well thanks to a digital measurement technique that additionally improves accuracy at high and low frequencies. For even greater reading speeds, select the 34411A, which achieves 50,000 readings a second at 4-1/2 digits. Enhanced Measurement Performance The 34410A and 34411A offer Temperature and Capacitance capabilities, in addition to those measurements you have come to expect, such as DCV, ACV, DCI, ACI, 2-wire and 4-wire Resistance, Frequency, Period, Continuity and Diode Test. You also get Offset Compensated Ohms, allowing you to accurately measure resistance in the presence of voltages. Measurement ranges have been expanded as well; for example, DC and AC Current Ranges now go down to 100 µA, resulting in 100 pA resolution. Real-time math and statistics are included, and a peak-detect capability allows you to capture peaks as short as 20 µs. Even Greater Performance with the 34411A The 34411A has all the features of the 34410A, plus additional performance that makes it even more powerful. With the ability to make 50,000 readings per second at 4-1/2 digits, Analog Level Triggering, programmable Pre- and Post- Trigger and 1 million readings of volatile memory in addition to 50,000 reading of non-volatile memory, you now have the ability to capture low-frequency waveforms, characterize device performance and transfer results for analysis on your computer. A front panel data logger function allows you to set the meter up to make unattended, paced measurements over a fixed time or number of events, then pull up the results later for review or transfer to a computer for analysis. Set the meter up to take measurements every 10 seconds for an hour, go have lunch, and check the results upon your return. The contextual front panel sequences make setup and read back a breeze. Modern I/O for Improved Connectivity LAN Extensions for Instruments (LXI) provides the next generation I/O for system applications requiring the highest throughput. Transfer rates of well over 100,000 readings/sec are attainable ensuring even the most data intensive measurements are fast, without the overhead cost of an instrument cardcage. Both the 34410A and the 34411A have been designed for LXI-Class C compliance. Includes: Test Lead Kit with probes and SMT attachments, test report, power cord, USB interface cable, Product Reference CD-ROM with soft documentation and software (IntuiLink, LabVIEW & IVI-COM drivers). 1 year warranty. (please look at our rules and privacy policy) |
l.luna@machine--tools.com (Leo Luna) for additional information. This email is used for forwarding to newsgroup user.
