|
1 Channel H.264 Full D1 Real Time Professional DVR Card * Real time 30 fps per channel * High resolution 704x480 (NTSC), 704x576 (PAL) * Up to 4 channels installed on one PC * Support up to 4 channels playback while recording * Motherboard: (recommended) Intel chipset 845, 865, 875, 915 * Display Card: (recommended) GeForce 4MX 440 64MB or ATI 9200,9500 64MB * Real time H.264 Base Profile (MPEG4 Part 10) * Supports Constant Bit Rate (CBR) and Variable Bit Rate (VBR) * Support up to 4 channels encording at the same time on one PC * Up to 704*480 (NTSC), 704*576 ( PAL) * 60kbit/sec to 2Mbit.sec (Variable Bit Rate) * 384kbit/sec to 2Mbit/sec (Constant Bit Rate) * HB1521 card supports encoding video in full D1 and CIF resolution full frame at the same time * 30 fps per channel (NTSC), 25 fps per channel (PAL) * Real time preview, recording and palyback * Setup all parameters while encoding * Hardware filter to de-interlace and reduce noise * Composite video/BNC 1 VP-P, 75Ω * G.729 Audio 8kbit/sec and PCM 64kbit/sec * RCA: Line in/Microphone in Selectable * H.264 video stream and H.264 system stream * Support up to 4 channels playback while recording * Supports video decoder card and display video on VGA and output analog signal * Playback and remote view by Media Player and IE * Detection by active area and sensitive priority * Add TT: MM: DD and HH: MM: SS: FF format data in video * Add fixed picture and set mosaic area in video * Provide video mosaic region for each channel * Each card has its unique serial number * Less that 1W for each channel * Managed with different frame rate and Q-factor with maximum data rate * Enable channel display on specific area * Set YY: MM: DD: HH: MM: SS format data, mosaic area and logo position * Support up to 4 channels playback while under compression * Play, pause, fast forward and step by frame * Support Windows Media Player and IE * Support TCP/UDP protocol up to 4 channels display at the same time under normal broadband You must have a return authorization number to return your product. Please contact L.ball@machine--tools.com to obtain an authorization number, which shall be valid for 14 days after issued. This product is covered by a warranty of 12 months. You must have a return authorization number to service your product. Please contact L.ball@machine--tools.com to obtain an authorization number. (please look at our rules and privacy policy) |
L.ball@machine--tools.com (Lula Ball) for additional information. This email is used for forwarding to newsgroup user.
