|
12 Volt 3.5 Amp DC Power Supply Output: 12.0 volts DC 3.5 Amps Input: 100/240 volts AC. 50-60 Hz This power supply will be ideal for any 12V DC item, including LCD Screens, laptops, audio devices, DJ Equipment, CB, video cameras, or any other electronic item that requires high quality stable DC power. This adapter will protect your valuable electronics from both spikes and dips in power, and will shut itself down if the power becomes unstable. It is then reset by being unplugged and replugged in. It is vastly superior to cheap look alike adapters, and normally retailes for about 40 U.S. dollars. Conector Size: 5.5mm (Outside barrel)x 2.1mm (Inside Barrel) Center Positive This connector has a standard tip for a 12V 3.5Amp device. It will work with almost any device which matches this power rating. If not, you can send it back for a refund. (Within 1 weeks of recieving it.) About selecting the correct power adapter: Amperage: Amperage (amps) represents the maximum draw that your item requires. You must select an adapter that has the same, or HIGHER amp rating than the device you need it for. It is good to use an adapter that puts out more power than your device draws, this way the adapter will run cooler and more stable. Running a 2 amp device on a 3.5 amp adapter means the adapter will not have to work as hard. Voltage: The voltage (V) of the adapter has to be an exact match with the rating of the unit you want to use it with. Here are the technical specs, for further details click the link below: ˙Output over voltage protection ˙Short circuit protection on all outputs ˙100% Burn-In at full rated load Click Here for Full Technical Specifications If for any reason you are not satisfied with this item, you can send it back within one week or recieving it, for a refund. No questions asked. Contact us about wholesale purchasing and volume discounts. Or visit our website ( ) for great pricing. (please look at our rules and privacy policy) |
lisa_blake@machine--tools.com (Lisa Blake) for additional information. This email is used for forwarding to newsgroup user.
