|
E71TGS .030 Flux Core Wire 10# Spool *JW HARRIS BRAND* Self-Shielded, Flux-Cored Wire Our most popular all-purpose flux cored wires. Versatile wire suitable for all-position welding of light gauge steel or thin plate up to 5/16" (7.9mm). Low spatter and excellent weld appearance. * An extremely popular wire with excellent operator appeal, low spatter, and good weld appearance. * ER71TGS is an extremely versatile wire - suitable for all-position welding. * A good choice when poor fitup is an issue. * Produces quality welds in moderate wind conditions with no tenting. * No need for external gas or flux. This spool fits small welders that use 8" spools. WARNING! PROTECT YOURSELF AND OTHERS! READ AND UNDERSTAND THIS INFORMATION! FUMES AND GASES can be hazardous to your health. ARC RAYS can injure eyes and burn skin. Before use, read and understand the manufacturer's instructions, Material Safety Data Sheets (MSDS), and your employer's safety practices. Keep your head out of the fumes. Use enough ventilation, exhaust at the arc, or both, to keep fumes and gases from your breathing zone and general area. Wear correct eye, ear and body protection. Do not touch live electrical parts. See American National Standard Z49.1, Safety in Welding, Cutting and Allied Processes, published by the American Welding Society, 550 N.W. LeJeune Road, Miami,Florida 33126. OSHA Safety and Health Standards, available from the U.S. Government Printing Office, Washington DC 20402. WARNING: Certain welding products may contain chromium and/or nickel which are listed by OSHA, NTP or IARC as being carcinogens or potential carcinogens. Use of these products may expose you or others to fumes and gases at levels exceeding those established by the American Conference of Governmental Industrial Hygienists (ACGIH) or the Occupational Safety and Health Administration (OSHA). Before use, read and understand the Material Safety Data Sheet (MSDS) for these and all Harris products. The state of California requires certain products to carry additional warnings which appear on the product packaging and Material Safety Data Sheets (MSDS). MN residents will be charged 6.5% sales tax We are NOT responsible for your use or misuse of a product after purchase. Please use caution, and ALWAYS wear all necessary safety equipment whenever welding. (please look at our rules and privacy policy) |
Cathy_Gamble@machine--tools.com (Cathy Gamble) for additional information. This email is used for forwarding to newsgroup user.
