RCA RADIOTRON DESIGNER'S HANDBOOK, dated 1953, 4th Editon, 1,482 Pages, Edited by F. Langford-Smith .... Reproduced and Distributed by RCA Victor Division RADIO CORPORATION OF AMERICA HARRISON, N.J .......... A comprehensive, self-explanatory reference handbook in the design and application of radio receivers or audio amplifiers ...... The 38 chapters are: * 1: Introduction to the Radio Valve * 3: The Testing of Oxide-Coated Cathode High-Vacuum Receiving Valves * 5: Transformers and Iron-Cored Inductors * 8: Wave Motion and the Theory of Modulation * 10: Calculation of Inductance * 11: Design of Radio Frequency Inductors * 12: Audio Frequency Voltage Amplifiers * 13: Audio Frequency Power Amplifiers * 15: Tone Compensation and Tone Control * 16: Volume Expansion, Compression and Limiting * 17: Reproduction from Records * 18: Microphones, Pre-Amplifiers, Attenuators and Mixers * 19: Units for the Measurement of Gain and Noise * 21: The Network Between the Power Output Stage and the Loudspeaker * 22: Aerials and Transmission Lines * 23: Radio Frequency Amplifiers * 25: Frequency Conversion and Tracking * 26: Intermediate Frequency Amplifiers * 27: Detection and Automatic Volume Control * 29: Limiters and Automatic Frequency Control * 33: Current and Voltage Regulators * 35: Design of Superheterodyne A-M Receivers * 37: Receiver and Amplifier Tests and Measurements * 38: Tables, Charts and Sundry Data In good condition with clean, intact pages and good binding, some wear&tear on one spot on very bottom edge, measures about 9" x 6" x 3" thick (please look at our rules and privacy policy) |
TPatton@machine--tools.com (Tyler Patton)
for additional information. This email is used for forwarding to newsgroup user.