Atwood Vacuum Systems 4 Post Ram hydraulic press 3000PSI pump with 5" dia. cylinder, Dual palm buttons & 40 gallon Barker Rockford pump & tank. Die Area: 18" wide between posts x 10" wide bolster plate Adjustment Down: 2" threaded turn buckel on Rod End Currently set up with Steel stops at 13.5" from bottom. Could be made shorter or longer. It does not say it on the press but based on cylender area and pump pressure, this was sold as a 30 ton machine. I would safly rate it at 27 tons. Wiring schematics in control panel. Nice parts bin built into table - could be removed. Press looks in good condition and is a bargain for such a nice piece. tommycampbell@machine--tools.com or (***)-484-4449. (please look at our rules and privacy policy) |
tommycampbell@machine--tools.com (Tommy Campbell)
for additional information. This email is used for forwarding to newsgroup user.