Here is a Baldor dual-axis linear stepper system mounted on a theta rotation stage. Stationary platen is 14" x 14" and the forcer measures about 5 3/4" square. This is a very accurate motion system and should last many years as the forcer rides on air bearings. 40 to 60psi is required to lift the forcer, which is actually 1/2 of the motor, and the platen surface is the other half. Positional accuracy is 2.5microns/ 300mm, and zero backlash. Acceleration is 8 meters/second, about 10G's. This unit may is an Industrial Devices Company unit, and rotates a full 360°. For more info click here: http:// /products/linearproducts/overview.asp This unit is in excellent condition. I do not have the driver electronics for the X/Y linear motor stage but I do have IDC motor drivers for the IDC rotation stage available in another X/Y translation stage, but I did apply 50psi air to the forcer via the 1/4" right-angle connector. This was cool....you can move it in both axis' by hand and feel it "indexing" as you move it, much like you can feel the magnetic effect when spinning the shaft of a stepper motor. When air is removed, it is impossible to move the forcer. The forcer has threaded holes for adding optional fixtures. I am happy to offer a five day right-of-return warranty for this puppy is heavy! As shown, 88 pounds delivery policy, so it will likely have to go via 3 day Express Saver. I pack very well, and this unit will be double-boxed. I will be pleased Unless otherwise noted, warranty, if offered, is five calander days. Questions? Be sure to email, or call (***)-824-2991 between the hours of 9am and 6pm eastern time, USA (please look at our rules and privacy policy) |
alexis.sharpe@machine--tools.com (Alexis Sharpe)
for additional information. This email is used for forwarding to newsgroup user.