|
We just bought out a long time Phoenix surplus electronics distributor. All of these parts are absolutely "as new", most are aerospace quality, and most are leading traditional American brands. The bulk of the items are unused production overstock. Offered items are not ROHS Reed relays offer extreme reliability, low noise and minimum contact bounce, are nonsparking, and have low operating currents. Offered here are one of the finest traditional Magnecraft brands of reed relays of an item still in current production and normally selling for $2.70 or more at distributors. Magnecraft W171DIP7 is a 14-pin DIP sized relay with a 5 volt coil and a SPST normally open reed The coil resistance is 500 Ohms, meaning a ten milliampere operating current. The contacts are limited to switching ten watts maximum, but can block 200 volts or switch half an amp. Maximum non-switched current is 1.2 amps. Pins 2 and 6 ( counting the missing pins on a standard 16 pin DIP clounterclockwise from the top ) are the coil. Pins 1 and 14 are left end of the SPST contact, while pins 7 and 8 are the right end. Standard DIP package footprint with pins on 0.1 inch centers. Package is a quarter inch high and thus higher than standard integrated circuits. Black epoxy package. Internal protection diode is included. The cathode of the diode goes to pin two, the anode to pin six. Guaranteed usable. Received by us in very clean and as new condition as loose distributor stock. May include very minor storage cosmetics. Some pins may occasionally need minor adjustment. You can click here to reach the Magnecraft web site. Or here for a PDF Format Data Sheet. Image shown is of a different relay in a similar package. Units offered here have 5 vdc coild, an internal protecting diode, and the above part number. for the first lot of 15 and $1 extra for each additional lot of 15. AZ residents add 8.1% sales tax. (please look at our rules and privacy policy) |
L_Wyatt@machine--tools.com (Leo Wyatt) for additional information. This email is used for forwarding to newsgroup user.
