|
I am downsizing my shop, so I am selling my converted pin router. This has been used all of 4 hours a week for the past two years. I am the second owner of this machine. I purchased this from a shop that was going out of business. This shop was a custom shop that made furniture. It was a 10HP 3 phase machine, that I converted to 220 1 Phase. You can run this in a residential shop no issues. All of the wiring and switching has been convereted to 220, just plug in and go. I am in Naperville IL and I bought the motor from drysilker motors in wheaton IL. The motor is European standards that can be bought through a bunch of other companies. This motor is 2 years old but has a small # of hours on it. I have tons of jigs with this machine, A circle cutting jig, a jointer type of jig where you can create custom molding. I ran 20ft sections of fir for a house here in Naperville. This machine is for local pickup only. Its heavy and on a pallet already. To move this you will need to bring a truck with a trailer or a truck with a lift gate. I can assist somewhat but its big and heavy this is not for the faint of heart. I have a lot of tools for this router, the wrenchs to remove the collets, the grease gun to top off the bearings, which use isoflex grease. I have a 1/4, 3/8, and 1/2 collet along with the pins. At one point I was going to upgrade the bearnings to ceramic, but I am not using the machine enough... This machine is located in north naperville IL close to Dielh and washington streets. You can come and look at it if you want but... it works and I use it, so if you make the visit bring cash for the purchase. The throat is 28 inches. The table is 30x35. 5 feet wide from back to front and 70 inches tall. About 1500lbs. I think the head moves up and down by 3.25 inches. Its a stopper machine that has 6 different settings that you can customize. I have mine set at 1/4 increments. I have most of the manuals. This machine was made in italy. Its a real machine not like the cheap china stuff today. I think this machine is from the early 80's... Please ask me any more questions. BIGDGUITARS . C O M on the web (please look at our rules and privacy policy) |
aharvey@machine--tools.com (Alice Harvey) for additional information. This email is used for forwarding to newsgroup user.
