|
Liquid Crete Release is a bubble gum scented solvent based liquid release agent that is used to release decorative concrete stamps, stencils, and patterns cleanly without ruining the look. Combustible liquid (Flash point >142 degrees F). Keep away from open flame and heat. Do not smoke. Avoid direct contact. Skin and eye irritation may occur. Use in well-ventilated area. Inhalation of vapors may cause breathing difficulties. KEEP OUT OF REACH OF CHILDREN. Strongly recommended for exterior use only. First aid is as follows: Move victim from exposure source. Flush eyes with water for 10-15 minutes. Remove contaminated clothing. Wash with soap and water. If irritation persists seek medical attention. Move victim to fresh air immediately. Contact physician if breathing is difficult. Apply to the surface or to stamping mats at a rate of 1,000 square feet per 5 gallon pail or 200 square feet per gallon to allow easy removal of stamping mats, stencils and patterns. Also retards the surface for longer workability and can be used with color hardeners for antiquing. (please look at our rules and privacy policy) |
JWilkerson@machine--tools.com (Julian Wilkerson) for additional information. This email is used for forwarding to newsgroup user.
