|
Edward Blake Co., Newton Ctr. Mass., Tap Grinder, No.2, 115V, 60 Hz, 3450 RPM, 4.6 Amp. Installed are (2) 6" grinding wheels, one made by Edward Blake, wheel #801. It is mounted on a base with ways and can move back/forward. The ways on the grinder are 10" long and are adjustable for tightness. The base on one side has a 3/8" mounting hole and on the opposite side it is graded 0 deg to 90 deg. Grinder runs good and smooth. There is no play in the ways and the wheels are still very good. Dimensions (grinder only)- 12" wide x 7" deep x 9" high. The adjusting screw extends 12" forward. The base approximately 11"from the mounting hole to the edge of the grading and is 5/8" thick. For questions please send email to: carlapate@machine--tools.com Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Smart Services for Smart Sellers (please look at our rules and privacy policy) |
carlapate@machine--tools.com (Carla Pate) for additional information. This email is used for forwarding to newsgroup user.
